Pro-Series Wire-Feed Spoolgun-Ready 140-Amp MIG Welder Kit in my opinion

A previous week. I search for information on the Pro-Series Wire-Feed Spoolgun-Ready 140-Amp MIG Welder Kit, so i would like to bring a story to tell.

Pro-Series Wire-Feed Spoolgun-Ready 140-Amp MIG Welder Kit

Pro-Series Wire-Feed Spoolgun-Ready 140-Amp MIG Welder Kit: Gas regulator 10' gas hose and hose clamp TWECO type MIG gun with 0.03 contact tip 10' ground cable with earth clamp 3 extra 0.03 contact tips 0.5 lbs of 0.0.3 flux wire and 0.023 MIG wire Welds mild steel between 24-gauge and 3/16" thick in a single pass Maximum control with infinite heat/voltage settings, overload and thermal protection and infinite wire feed Spot timer for consistent and dependable welds Spoolgun-ready design makes working with aluminum easier Also welds mild steel and stainless steel with ease 115V, 60 Hz, adjustable amp output range of 30 to 140 20 percent duty cycle at 90 amps Use with or without shielding gas CSA Approved Read more

Read More

Review INEFIL ER70S-6 .023-Inch on 10-Pound Spool Carbon Steel, Great for sheet metal.

The few days ago. I search for information on the INEFIL ER70S-6 .023-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding, so i would like to describe here.

There is not much to say about wire. This wire, 75% argon and 25% tips. carbon 025 D had my welder welding actually. I hadn't touched my soldering iron in a few years, other than to move it out of the way. If you have a mig welder 125 volt too small, underpowered, you may want to consider a string of small arms. well, it works with the stuff I need to weld, auto body, auto repair, lawnmower pots.

Read More

Review Lincoln Electric ED030631 MIG Welding Wire L-56 .030 Spool

A yesterday. I'm looking for information on the Lincoln Electric ED030631 MIG Welding Wire L-56 .030 Spool, so i have to tell.

Read More

Review Pro-Series Wire-Feed, Spoolgun-Ready 140 Amps MIG Welder Kit MMIG140

A previous week. I'm looking for information on the Pro-Series Wire-Feed, Spoolgun-Ready 140 Amps MIG Welder Kit MMIG140, so i would like to describe here.

Pro-Series Wire-Feed, Spoolgun-Ready 140 Amps MIG Welder Kit MMIG140

Pro-Series Wire-Feed, Spoolgun-Ready 140 Amps MIG Welder Kit MMIG140 Read more

Read More

Review Hobart H222106-RTP 0.030-Inch 4-Pound E71T-11 Flux-Cored, Good wire and good price.

A several days before. I search for information on the Hobart H222106-RTP 0.030-Inch 4-Pound E71T-11 Flux-Cored Welding Wire,, so i would like to describe here.

good value to some top rated FC thread, make sure that the welding machine is vs DC. AC output and reverse direct vs.. delivered for low spatter and performance. some cheap wire feed welders AC output the preferred domain controller and you squirt like crazy. I have both AC and DC wire feeder welders. check your soldering iron. FYI... I got two rolls July 2015.

Read More

Lincoln Electric Innershield NR-211 Flux-Cored Welding Wire - 1-lb. Spool 0.035 Inch Diameter Model ED030584 in my opinion

A yesterday. I'm looking for information on the Lincoln Electric Innershield NR-211 Flux-Cored Welding Wire - 1-lb. Spool, so i would like to bring a story to tell.

Read More

LINCOLN ELECTRIC ED030584 MIG Welding Wire, NR-211-MP, .035, Spool in my opinion

The previous week. I'm looking for information on the LINCOLN ELECTRIC ED030584 MIG Welding Wire, NR-211-MP, .035, Spool, so i would like to bring a story to tell.

LINCOLN ELECTRIC ED030584 MIG Welding Wire, NR-211-MP, .035, Spool

MIG Welding Wire, Innershield NR-211-MP, Mild Steel Flux-Core, Dia. (In.) .035, Container 1.0 lb. Spool, Min. Tensile Strength (PSI) 70, Plate Thicknesses In The Range Of 7.9 mm (5/16 In.) To 12.7 mm (1/2 In.) , Applications With Copper Back-Up, Sheet Or Thin Gauge Metal, Propane Cylinders And Robotics/Hard Automation Features Application: Plate Thicknesses In The Range Of 7.9 mm (5/16") To 12.7 mm (1/2") , Applications With Copper Back-Up, Sheet Or Thin Gauge Metal, Propane Cylinders And Robotics/Hard Automation Container Type: Spool Dia. (In.) : .035 Item: MIG Welding Wire Material: Mild Steel Flux-Core Type: Innershield NR-211-MP Container Size: 1 lb. Series: Innershield NR-211-MP Standards: AWS A5.20 Min. Tensile Strength ... Read more

Read More

INEFIL ER70S-6 .030-Inch on 10-PoundSpool Carbon, stunning welding material in my opinion

The yesterday. I search for information on the INEFIL ER70S-6 .030-Inch on 10-PoundSpool Carbon Steel Mig Solid Welding, so i would like to bring a story to tell.

I purchased this wire coil just like I started a new project (welding the frame work for my wife's mobile grooming van) and it preformed perfectly. I was mainly welding 1/8th inch square tube. I was 75/25 mix gas welding and has good penetration and pearls were smooth and strong. This thread seems to be a very good value for money.

Read More

Speedway 7643 90-Amp Wire Feed Flux Welder in my opinion

A yesterday. I'm looking for information on the Speedway 7643 90-Amp Wire Feed Flux Welder, so i would like to describe here.

Read More

LINCOLN ELECTRIC ED030583 MIG Welding Wire, L-56, .025, Spool in my opinion

A few days earlier. I search for information on the LINCOLN ELECTRIC ED030583 MIG Welding Wire, L-56, .025, Spool, so i would like to describe here.

LINCOLN ELECTRIC ED030583 MIG Welding Wire, L-56, .025, Spool

MIG Welding Wire, Super Arc L-56, Mild Steel, Copper Coated, Dia. (In.) .025, Container 2.0 lb. Spool, Min. Tensile Strength (PSI) 70, All Medium To Heavy Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Automotive Repair, Robotic Or Hard Automation And Structural Steel Features Application: All Medium To Heavy Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Automotive Repair, Robotic Or Hard Automation And Structural Steel Container Type: Spool Dia. (In.) : .025 Item: MIG Welding Wire Material: Mild Steel, Copper Coated Type: Super Arc L-56 Container Size: 2 lb. Series: Super Arc L-56 Standards: AWS A5.18 Min. Tensile Strength (PSI) : ... Read more

Read More

Review INEFIL ER70S-6 .035-Inch on 10-Pound Spool, Same Product as Big Box 1/4 the Price

The week ago. I'm looking for information on the INEFIL ER70S-6 .035-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding, so i would like to bring a story to tell.

This wire welds the exact same as a roll that I purchased for $ 65 bucks into a big box store for only $ 25. A . I will never buy yarn in a shop again.

Read More

12.5-lb 0.03-in All Positions MIG Welding Wire ED028676 in my opinion

The week ago. I search for information on the 12.5-lb 0.03-in All Positions MIG Welding Wire ED028676, so i would like to describe here.

Read More

Review LINCOLN ELECTRIC ED028676 MIG Welding Wire, L-56, .035, Spool

The yesterday. I search for information on the LINCOLN ELECTRIC ED028676 MIG Welding Wire, L-56, .035, Spool, so i have to tell.

LINCOLN ELECTRIC ED028676 MIG Welding Wire, L-56, .035, Spool

MIG Welding Wire, Super Arc L-56, Mild Steel, Copper Coated, Dia. (In.) .035, Container 12.5 lb. Spool, Min. Tensile Strength (PSI) 70, All Medium To Heavy Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Automotive Repair, Robotic Or Hard Automation And Structural Steel Features Application: All Medium To Heavy Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Automotive Repair, Robotic Or Hard Automation And Structural Steel Container Type: Spool Dia. (In.) : .035 Item: MIG Welding Wire Material: Mild Steel, Copper Coated Type: Super Arc L-56 Container Size: 12.5 lb. Series: Super Arc L-56 Standards: AWS A5.18 Min. Tensile Strength (PSI) ... Read more

Read More

ARKSEN MIG-130 Gas-Less Flux Core Wire Welder Welding Machine, MIG -130 Welder in my opinion

A previous week. I search for information on the ARKSEN MIG-130 Gas-Less Flux Core Wire Welder Welding Machine Automatic, so i would like to describe here.

the MIG welder was shipped quickly. I loaded the yarn. I had to go to YouTube for help because it was my first installation of core wire in a MIG welder and instructions are not useful, no pictures. I tried. seems to work OK. It feels well made. The gun feels good in my grip.

Read More

Lincoln Electric SuperArc L-56 Premium Copper-Coated MIG Welding Wire 2 lb Spool 0.025" Dia in my opinion

The few days before. I search for information on the Lincoln Electric SuperArc L-56 Premium Copper-Coated MIG Welding Wire 2, so i have to tell.

Read More

LINCOLN ELECTRIC ED032924 MIG Welding Wire, L-50, .035, Spool in my opinion

The few days earlier. I search for information on the LINCOLN ELECTRIC ED032924 MIG Welding Wire, L-50, .035, Spool, so i would like to bring a story to tell.

LINCOLN ELECTRIC ED032924 MIG Welding Wire, L-50, .035, Spool

MIG Welding Wire, Super Arc L-50, Mild Steel, Copper Coated, Dia. (In.) .035, Container 33.0 lb. Spool, Min. Tensile Strength (PSI) 70, Clean To Light Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Pipeline, Pressure Vessels And Structural Steel Features Application: Clean To Light Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Pipeline, Pressure Vessels And Structural Steel Container Type: Spool Dia. (In.) : .035 Item: MIG Welding Wire Material: Mild Steel, Copper Coated Type: Super Arc L-50 Container Size: 33 lb. Series: Super Arc L-50 Standards: AWS A5.18 Min. Tensile Strength (PSI) : 70 Container: 33.0 lb. Spool Diameter: 0.035" ... Read more

Read More

Review Hobart 500559 Handler Wire Welder, Great Welder

A week ago. I'm looking for information on the Hobart 500559 Handler Wire Welder, so i have to tell.

Ive been welding for 10 years at work and to the houses of buddy but never wanted to break down and buy my. the day came where I needed one and I wanted one I could throw in my car and take anywhere and everywhere the plug-in. I read a lot of the best of the best for my needs 1/4 inch mild steel max. so after much debate purchased this little beast and let me tell you this thing kicking ass miller 140 of my friend. I'm not sure why we are using both the welding. 35

Read More

Review Lincoln Electric ED030632 MIG Welding Wire L-56 .035 Spool

The several days before. I'm looking for information on the Lincoln Electric ED030632 MIG Welding Wire L-56 .035 Spool, so i would like to bring a story to tell.

Read More

LINCOLN ELECTRIC ED015790 MIG Welding Wire, L-56, .025, Spool in my opinion

The previous week. I'm looking for information on the LINCOLN ELECTRIC ED015790 MIG Welding Wire, L-56, .025, Spool, so i would like to describe here.

LINCOLN ELECTRIC ED015790 MIG Welding Wire, L-56, .025, Spool

MIG Welding Wire, Super Arc L-56, Mild Steel, Copper Coated, Dia. (In.) .025, Container 12.5 lb. Spool, Min. Tensile Strength (PSI) 70, Clean To Light Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Pipeline, Pressure Vessels And Structural Steel Features Application: Clean To Light Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Pipeline, Pressure Vessels And Structural Steel Container Type: Spool Dia. (In.) : .025 Item: MIG Welding Wire Material: Mild Steel, Copper Coated Type: Super Arc L-56 Container Size: 12.5 lb. Series: Super Arc L-56 Standards: AWS A5.18 Min. Tensile Strength (PSI) : 70 Container: 12.5 lb. Spool Diameter: 0.025" ... Read more

Read More

Review Campbell Hausfeld WF2150 Flux Core Wire Feed Welder, go welder for the price

A several days before. I search for information on the Campbell Hausfeld WF2150 Flux Core Wire Feed Welder, so i would like to bring a story to tell.

My only hesitation in giving this element a rating of 5 stars is that I am a newbie in welding arc that I may not be qualified to provide such a high rating for any welder. before you buy this welder my only experience with arc welding has been a brief introduction to stick welding I as part of a Junior High School shop class in late 1950. I still remember how difficult it was to try to start an arc and move on while also having turn the helmet

Read More

Weldcote Metals Weldcote .035" x 11 lb. Spool MIG Welding Wire 70S-6 in my opinion

A couple of days ago. I search for information on the Weldcote Metals Weldcote .035" x 11 lb. Spool MIG Welding Wire 70S-6, so i would like to describe here.

Read More

LINCOLN ELECTRIC ED031448 MIG Welding Wire, NR-211-MP, .030, Spool in my opinion

A week ago. I search for information on the LINCOLN ELECTRIC ED031448 MIG Welding Wire, NR-211-MP, .030, Spool, so i would like to bring a story to tell.

LINCOLN ELECTRIC ED031448 MIG Welding Wire, NR-211-MP, .030, Spool

MIG Welding Wire, Innershield NR-211-MP, Mild Steel Flux-Core, Dia. (In.) .030, Container 1.0 lb. Spool, Min. Tensile Strength (PSI) 70, Plate Thicknesses In The Range Of 7.9 mm (5/16 In.) To 12.7 mm (1/2 In.) , Applications With Copper Back-Up, Sheet Or Thin Gauge Metal, Propane Cylinders And Robotics/Hard Automation Features Application: Plate Thicknesses In The Range Of 7.9 mm (5/16") To 12.7 mm (1/2") , Applications With Copper Back-Up, Sheet Or Thin Gauge Metal, Propane Cylinders And Robotics/Hard Automation Container Type: Spool Dia. (In.) : .030 Item: MIG Welding Wire Material: Mild Steel Flux-Core Type: Innershield NR-211-MP Container Size: 1 lb. Series: Innershield NR-211-MP Standards: AWS A5.20 Min. Tensile Strength ... Read more

Read More

Hobart H383806-R18 1-Pound ER5356 Aluminum Welding Wire,, go welder for the price in my opinion

The week ago. I search for information on the Hobart H383806-R18 1-Pound ER5356 Aluminum Welding Wire, 0.030-Inch, so i would like to describe here.

Read More

Lincoln Electric KH513 MIG Welding Wire 4043 .030 Spool in my opinion

The week ago. I search for information on the Lincoln Electric KH513 MIG Welding Wire 4043 .030 Spool, so i would like to describe here.

Read More

LINCOLN ELECTRIC ED025946 MIG Welding Wire, L-56, .045, Spool in my opinion

A couple of days ago. I search for information on the LINCOLN ELECTRIC ED025946 MIG Welding Wire, L-56, .045, Spool, so i would like to describe here.

LINCOLN ELECTRIC ED025946 MIG Welding Wire, L-56, .045, Spool

MIG Welding Wire, Super Arc L-56, Mild Steel, Copper Coated, Dia. (In.) .045, Container 44.0 lb. Spool, Min. Tensile Strength (PSI) 70, All Medium To Heavy Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Automotive Repair, Robotic Or Hard Automation And Structural Steel Features Application: All Medium To Heavy Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Automotive Repair, Robotic Or Hard Automation And Structural Steel Container Type: Spool Dia. (In.) : .045 Item: MIG Welding Wire Material: Mild Steel, Copper Coated Type: Super Arc L-56 Container Size: 44 lb. Series: Super Arc L-56 Standards: AWS A5.18 Min. Tensile Strength (PSI) ... Read more

Read More

Review MIG 100 Flux Wire Welder, Awesome value for getting started

The previous week. I search for information on the MIG 100 Flux Wire Welder, so i would like to describe here.

I bought this welder to Horror Fright tools under the name of Chi-town electric. If you want good penetration on thicker material, you should preheat the welding material with a propane torch. If you are worried about splashing, use nozzle gel, or try a different brand of wire. I like my little unit, doing small jobs well. This welder allows me to have a core unit of dedicated stream is a dedicated drive solid core. I have had this unit for a few years, mine does not

Read More

Review Campbell Hausfeld WG216001AV 115V - 70 Amp MIG/Flux Wire Welder

A several days before. I search for information on the Campbell Hausfeld WG216001AV 115V - 70 Amp MIG/Flux Wire Welder, so i would like to describe here.

Read More

Review LINCOLN ELECTRIC ED023334 MIG Welding Wire, L-56, .030, Spool

The previous week. I search for information on the LINCOLN ELECTRIC ED023334 MIG Welding Wire, L-56, .030, Spool, so i would like to bring a story to tell.

LINCOLN ELECTRIC ED023334 MIG Welding Wire, L-56, .030, Spool

MIG Welding Wire, Super Arc L-56, Mild Steel, Copper Coated, Dia. (In.) .030, Container 12.5 lb. Spool, Min. Tensile Strength (PSI) 70, All Medium To Heavy Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 KSI) Yield Strength Material, Automotive Repair, Robotic Or Hard Automation And Structural Steel Features Application: All Medium To Heavy Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 KSI) Yield Strength Material, Automotive Repair, Robotic Or Hard Automation And Structural Steel Container Type: Spool Dia. (In.) : .030 Item: MIG Welding Wire Material: Mild Steel, Copper Coated Type: Super Arc L-56 Container Size: 12.5 lb. Series: Super Arc L-56 Standards: AWS A5.18 Min. Tensile Strength (PSI) ... Read more

Read More

Review Lincoln Electric K2185-1 Handy MIG Welder, Five Stars

A few days ago. I'm looking for information on the Lincoln Electric K2185-1 Handy MIG Welder, so i would like to describe here.

everything I expected. does a great job for it to. never had a problem with Lincoln products.

Read More

Review Hobart 500559 Handler 140 MIG Welder 115 V

A couple of days ago. I search for information on the Hobart 500559 Handler 140 MIG Welder 115 V, so i would like to describe here.

Read More

LINCOLN ELECTRIC ED023961 MIG Welding Wire, 308LSi, .030, Spool in my opinion

The several days before. I'm looking for information on the LINCOLN ELECTRIC ED023961 MIG Welding Wire, 308LSi, .030, Spool, so i would like to bring a story to tell.

LINCOLN ELECTRIC ED023961 MIG Welding Wire, 308LSi, .030, Spool

MIG Welding Wire, Bluemax 308LSi, Material Stainless, Dia. .030 In, Container Spool, Min. Tensile Strength 70 PSI, Application For Joining 304 Or 304l And Other Common 18-8 Austenitic Stainless Steel Grades, ASTM A743, A744 Types CF-8 & CF-3, Standards AWS A5.9 Features Application: For Joining 304 Or 304l And Other Common 18-8 Austenitic Stainless Steel Grades, ASTM A743, A744 Types CF-8 & CF-3 Container Type: Spool Dia. (In.) : .030 Item: MIG Welding Wire Material: Stainless Type: Bluemax 308LSi Container Size: 25 lb. Series: Bluemax 308LSi Standards: AWS A5.9 Min. Tensile Strength (PSI) : 70 Container: 25.0 lb. Spool Diameter: 0.030" AWS Classification: 308LSi Read more

Read More

Review Hobart H305406-R19 2-Pound ER70S-6 Carbon-Steel Solid Welding, Exceptional quality

The few days ago. I search for information on the Hobart H305406-R19 2-Pound ER70S-6 Carbon-Steel Solid Welding Wire, 0.030-Inch, so i would like to describe here.

What can be better than a roll of Hobart on a Hobart handler 187? Maybe a cold beer on a hot Sunday afternoon. I'm writing a review of the wire let me get at it. I went through a half dozen (at least) 2 lb spools in this solid wire from Hobart through my Hobart handler 187. I don't like buying larger spools, because I don't want the yarn while you are sitting in my garage to corrode/Rust. Once the wire begins to corrode/rust, you need to throw the

Read More

Review US Forge 00678 MIG Welding Wire 0.030" Aluminum

A previous week. I search for information on the US Forge 00678 MIG Welding Wire 0.030" Aluminum, so i would like to describe here.

Read More

LINCOLN ELECTRIC ED030631 MIG Welding Wire, L-56, .030, Spool in my opinion

A few days before. I search for information on the LINCOLN ELECTRIC ED030631 MIG Welding Wire, L-56, .030, Spool, so i would like to bring a story to tell.

LINCOLN ELECTRIC ED030631 MIG Welding Wire, L-56, .030, Spool

MIG Welding Wire, Super Arc L-56, Mild Steel, Copper Coated, Dia. (In.) .030, Container 2.0 lb. Spool, Min. Tensile Strength (PSI) 70, All Medium To Heavy Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Automotive Repair, Robotic Or Hard Automation And Structural Steel Features Application: All Medium To Heavy Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Automotive Repair, Robotic Or Hard Automation And Structural Steel Container Type: Spool Dia. (In.) : .030 Item: MIG Welding Wire Material: Mild Steel, Copper Coated Type: Super Arc L-56 Container Size: 2 lb. Series: Super Arc L-56 Standards: AWS A5.18 Min. Tensile Strength (PSI) : ... Read more

Read More

Pro-Series MMIG125 125 Amp Fluxcore Welder Kit, Black, great machine in my opinion

The few days before. I'm looking for information on the Pro-Series MMIG125 125 Amp Fluxcore Welder Kit, Black, so i have to tell.

the unit I received was sold as used but it seems that a new unit except a small chip from the corner. the unit works goods and I should also serve for a long time

Read More

Review Hobart S305406-G23 MIG Welding Wire 70S60.03011lb

The couple of days ago. I'm looking for information on the Hobart S305406-G23 MIG Welding Wire 70S60.03011lb, so i have to tell.

Read More

Review LINCOLN ELECTRIC ED030310 MIG Welding Wire, 4043, .045, Spool

A several days before. I search for information on the LINCOLN ELECTRIC ED030310 MIG Welding Wire, 4043, .045, Spool, so i have to tell.

LINCOLN ELECTRIC ED030310 MIG Welding Wire, 4043, .045, Spool

MIG Welding Wire, SuperGlaze 4043, Aluminum, Dia. (In.) .045, Container 1.0 lb. Spool, Min. Tensile Strength (PSI) 70, Automotive Bumpers And Supports, Structural Frames In The Shipbuilding Industry, Bicycle Frames And Formed Truck Panels Features Application: Automotive Bumpers And Supports, Structural Frames In The Shipbuilding Industry, Bicycle Frames And Formed Truck Panels Container Type: Spool Dia. (In.) : .045 Item: MIG Welding Wire Material: Aluminum Type: SuperGlaze 4043 Container Size: 1 lb. Series: SuperGlaze 4043 Standards: AWS A5.10 Min. Tensile Strength (PSI) : 70 Container: 1.0 lb. Spool Diameter: 0.045" AWS Classification: ER4043 Read more

Read More

LOTOS MIG140 140Amp MIG, My husband has been wanting a better one than he had in my opinion

The couple of days ago. I'm looking for information on the LOTOS MIG140 140Amp MIG Welder - Additional Flux Cored and Aluminum Gas, so i would like to bring a story to tell.

I just received my mig 140 lotos set up and made some passes with it on some 1/8th inch box tubing. everything works perfectly. I am using the cable supplied with the machine and I picked up a bottle of 75/25 gas 80cf. I'll do a video on YouTube. will be called lotos mig 140. Watch "Lotos mig 140" on YouTube https://youtu.be/gFuqOA619is

Read More

Westward er70s6-023-02 MIG Welding wirecarbon steel0.023 in. in my opinion

A couple of days ago. I'm looking for information on the Westward er70s6-023-02 MIG Welding wirecarbon steel0.023 in., so i would like to describe here.

Read More

LINCOLN ELECTRIC KH513 MIG Welding Wire, 4043, .030, Spool in my opinion

The several days before. I search for information on the LINCOLN ELECTRIC KH513 MIG Welding Wire, 4043, .030, Spool, so i have to tell.

LINCOLN ELECTRIC KH513 MIG Welding Wire, 4043, .030, Spool

MIG Welding Wire, SuperGlaze 4043, Aluminum, Dia. (In.) .030, Container 1.0 lb. Spool, Min. Tensile Strength (PSI) 70, Automotive Bumpers And Supports, Structural Frames In The Shipbuilding Industry, Bicycle Frames And Formed Truck Panels Features Application: Automotive Bumpers And Supports, Structural Frames In The Shipbuilding Industry, Bicycle Frames And Formed Truck Panels Container Type: Spool Dia. (In.) : .030 Item: MIG Welding Wire Material: Aluminum Type: SuperGlaze 4043 Container Size: 1 lb. Series: SuperGlaze 4043 Standards: AWS A5.10 Min. Tensile Strength (PSI) : 70 Container: 1.0 lb. Spool Diameter: 0.030" AWS Classification: ER4043 Read more

Read More

Forney 304 MIG Welder 95FI-A Flux Core Only,, 5 stars from a commercial welder in my opinion

A few days before. I search for information on the Forney 304 MIG Welder 95FI-A Flux Core Only, 120-Volt, 95-Amp, so i would like to describe here.

This works great for small repairs around the House or in the garage .... not a professional quality tool mind you, but it does exactly what it was designed to do. ... solder the little things. I wouldn't do any manufacturing serious with it, but just little things here and there, it gets the job done. one thing I will note, although it is designed to plug into a standard outlet 115, make sure you have a dedicated 20 amp circuit breaker for it or you could take any switch

Read More

Eastwood MIG Welder Wire Solid 0.023 12226 in my opinion

A week ago. I'm looking for information on the Eastwood MIG Welder Wire Solid 0.023 12226, so i have to tell.

Read More

Review LINCOLN ELECTRIC ED032923 MIG Welding Wire, L-50, .030, Spool

A few days earlier. I'm looking for information on the LINCOLN ELECTRIC ED032923 MIG Welding Wire, L-50, .030, Spool, so i have to tell.

LINCOLN ELECTRIC ED032923 MIG Welding Wire, L-50, .030, Spool

MIG Welding Wire, Super Arc L-50, Mild Steel, Copper Coated, Dia. (In.) .030, Container 33.0 lb. Spool, Min. Tensile Strength (PSI) 70, Clean To Light Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Pipeline, Pressure Vessels And Structural Steel Features Application: Clean To Light Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Pipeline, Pressure Vessels And Structural Steel Container Type: Spool Dia. (In.) : .030 Item: MIG Welding Wire Material: Mild Steel, Copper Coated Type: Super Arc L-50 Container Size: 33 lb. Series: Super Arc L-50 Standards: AWS A5.18 Min. Tensile Strength (PSI) : 70 Container: 33.0 lb. Spool Diameter: 0.030" ... Read more

Read More

Forney 42286 Mig Wire, Mild Steel ER70S-6, .030-Diameter,, 5 stars from a commercial welder in my opinion

A several days before. I'm looking for information on the Forney 42286 Mig Wire, Mild Steel ER70S-6, .030-Diameter, 10-Pound Spool, so i would like to bring a story to tell.

Read More

Review Flux Core .035 MIG Wire 2 lbs.

The several days before. I search for information on the Flux Core .035 MIG Wire 2 lbs., so i would like to describe here.

Read More

LINCOLN ELECTRIC ED032927 MIG Welding Wire, L-56, .035, Spool in my opinion

The yesterday. I'm looking for information on the LINCOLN ELECTRIC ED032927 MIG Welding Wire, L-56, .035, Spool, so i have to tell.

LINCOLN ELECTRIC ED032927 MIG Welding Wire, L-56, .035, Spool

MIG Welding Wire, Super Arc L-56, Mild Steel, Copper Coated, Dia. (In.) .035, Container 33.0 lb. Spool, Min. Tensile Strength (PSI) 70, All Medium To Heavy Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Automotive Repair, Robotic Or Hard Automation And Structural Steel Features Application: All Medium To Heavy Mill Scale Base Material, Sheet Metal To 380 - 485 Mpa (55 - 70 Ksi) Yield Strength Material, Automotive Repair, Robotic Or Hard Automation And Structural Steel Container Type: Spool Dia. (In.) : .035 Item: MIG Welding Wire Material: Mild Steel, Copper Coated Type: Super Arc L-56 Container Size: 33 lb. Series: Super Arc L-56 Standards: AWS A5.18 Min. Tensile Strength (PSI) ... Read more

Read More

Review Hobart H381806-R18 1-Pound ER4043 Aluminum Welding Wire, 0.030-Inch, high qulaity wire

The several days before. I search for information on the Hobart H381806-R18 1-Pound ER4043 Aluminum Welding Wire, 0.030-Inch, so i would like to describe here.

at the age of 45 years, I woke up and decided to stop putting off my dream of welding art. I was a little intimidated at first, but this equipment works like a dream. and in less than a month I've sold my first peace of art.

Read More

Review Weldcote Metals - Economic MIG Wire ER70S-6 0.03 2lbs.

A couple of days ago. I search for information on the Weldcote Metals - Economic MIG Wire ER70S-6 0.03 2lbs., so i have to tell.

Read More

Review LINCOLN ELECTRIC ED030312 MIG Welding Wire, 5356, .035, Spool

The week ago. I search for information on the LINCOLN ELECTRIC ED030312 MIG Welding Wire, 5356, .035, Spool, so i have to tell.

LINCOLN ELECTRIC ED030312 MIG Welding Wire, 5356, .035, Spool

MIG Welding Wire, SuperGlaze 5356, Aluminum, Dia. (In.) .035, Container 1.0 lb. Spool, Min. Tensile Strength (PSI) 70, Typical Applications include Automotive bumpers and supports, Structural frames in the shipbuilding industry, Bicycle frames and Formed truck panels. Features Application: Typical Applications include Automotive bumpers and supports, Structural frames in the shipbuilding industry, Bicycle frames and Formed truck panels. Container Type: Spool Dia. (In.) : .035 Item: MIG Welding Wire Material: Aluminum Type: SuperGlaze 5356 Container Size: 1 lb. Series: SuperGlaze 5356 Standards: AWS A5.10 Min. Tensile Strength (PSI) : 70 Container: 1.0 lb. Spool Diameter: 0.035" AWS Classification: ER5356 Read more

Read More

Review MIG Welder, Handheld, 120VAC, Four Stars

The few days earlier. I'm looking for information on the MIG Welder, Handheld, 120VAC, so i have to tell.

I can't believe I waited so long to buy one. first time welder and I fully restored a 10 1/4 6 * trailer inch grid frame with steel decking. This unit is amazing. has core 0.030 flux (you must use the wheel 0.025 feed size, 0035 don't feed the wire), 3 speed and smaller grid B volt for the frame, speed at 3 and C volts for welding thicker framing. get the gel mig tip and dip the tip of brass around every now and then. Home Depot $ 524 and locally is easier

Read More